Advanced Programming - Danfoss RET2000B-RF Manual Del Usuario

Advanced Programming

The RET2000B-RF Advanced Programming Mode can be
accessed as follows:
• Press the V button when in heat mode or Λ button when in
cool mode until the standby mode is reached.
• The Λ button or V button should then be released and
then pressed and held for a further 5 seconds to enter the
Advanced Programming Mode.
• To indicate that the unit is in Advanced Programming Mode
the Standby Indicator will flash and the display will show the
setting number alternating with the current value for that
setting.
• To change the setting press either the Λ or V button.
Danfoss Heating
GB GB
DE
DK
ES
FR
NL
RU
TR
9