User Advanced Programming Options; To Access User Advanced Programming - Danfoss TP9000 Guia Del Usuario

GB GB
4.0 User Advanced
PL
Programming Options
GR
Important: The thermostat has been set in the factory to suit most
ES
situations, however, there are additional optional settings which can
improve the comfort, convenience and energy eff ectiveness of your
thermostat. These are set in the User Advanced Programming and
Installer Advanced Programming modes.

4.1 To access User Advanced Programming

Press and hold V and PROG for 3 seconds. This will take you into
User Advanced Programming. Use + and - keys to scroll backwards
and forwards between options then Λ and V keys to change option
settings. The fl ashing digit on the right hand of the display indicates
the number of the selected option.
Option 1 - Enable or disable A/B programming
(Option 41 and/or 61 set to 5+2)
This enables or disables the A/B programming
option. Press + until Option 1 is displayed, use Λ and
V to select required setting.
Setting 0 Disabled, unit operates as 5+2
Setting 1 Enabled: activates A/B programming
Option 2 - Enable/Disable Advanced Programming (Option 41
and/or 61 set to 7 Day)
20
All manuals and user guides at all-guides.com
If Service Due date is set:
Pressing the INFO button will display the date the service
is due.
If in holiday mode:
Pressing the INFO button will display the holiday end
date.
TP9000