GE GTE21 Manual Del Propietario E Instrucciones De Instalación página 19

REVERSING THE DOOR SWING (Cont.)
REVERSING DOOR HANDLES –
3
TRANSFER FREEZER DOOR
HANDLE TO THE RIGHT SIDE OF
THE REFRIGERATOR DOOR
1. Remove the two screws securing the bottom
end of the handle with a Phillips screwdriver
and remove the GE Appliances badge.
2. For Plastic
handles: Pull
handle down and
off of the fastener
on the door.
For Stainless
Steel handeles:
Loosen the set
screw on the
wrench and
remove handle.
3. Remove the fastener from the surface of the
unit, the GE Appliances Badge can be found
call 800.GE.CARES (800.432.2737) (in
Canada call 800.561.3344).
49-60726-2
Installation Instructions
REVERSING DOOR HANDLES –
3
TRANSFER FREEZER DOOR
HANDLE TO THE RIGHT SIDE OF
THE REFRIGERATOR DOOR (Cont.)
4. Remove the plug
button from the
surface of the right
side of the refrigerator
door and insert the
fastener with
a Phillips screwdriver.
5. For Plasic handle:
Attach handle to fresh
food door on fastener
and slide downward to
lock in place with the
screws at the top of the
handle.
For Stainless Steel
handle: Attach handle
to fresh food door with
screws at the top of the
wrench to tighten the
set screw at the bottom
of the handle.
NOTE:
tighten.
19