Anker NEBULA Manual Del Usuario página 11

EN
Troubleshooting
① Fail to power on by the remote control?
• Hold for 2 seconds on the projector to power
on.
• When powered off, you cannot use the remote
control to power on.
② The remote control doesn't work?
• Remove the protective tab to activate the remote
control batteries.
③ Blurred image?
• Rotate the focus adjusting knob to get the best
focus.
④ Reversed projection image?
• Press to access the home menu, select
[Settings] > [Projector Mode] and switch to a
correct state.
⑤ Cannot connect to a Wi-Fi network?
• Refresh the list of available networks and retry.
• Reboot the wireless router or the device and retry.
⑥ How do I update the firmware?
• When new version is detected, you will be asked
to reboot and update.
18
Notice
Declaration of Conformity
This product complies with the radio
interference requirements of the European
Community. Hereby, Anker Technology
Co., Limited. declares that this device is in
compliance with the essential requirements
and other relevant provisions of Directive
2014/53/EU. For the Declaration of
Conformity, visit the Web site www.
SeeNebula.com/certification.
BT Maximum output power: 8 dBm; BT
Frequency band: 2402~2480 MHz;
Wi-Fi Max Output Power: 16 dBm (2.4G); 10
dBm (5G);
Wi-Fi Frequency Band: 2412~2472 MHz (2.4G);
5150~5250 MHz, 5725~5850 MHz (5G).
5150~5250 MHz can be used indoor only.
BG EE BE
This product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
This symbol means the product must not be
discarded as household waste, and should be
delivered to an appropriate collection facility
for recycling. Follow local rules and never
dispose of the product and rechargeable
batteries with normal household waste.
Correct disposal of old products and
rechargeable batteries helps prevent negative
consequences for the environment and
human health.
EN
ES LU RO
CZ FR HU
SI DK HR
19