Anker NEBULA Manual Del Usuario página 8

EN
[Auto Keystone Enable / disable auto
Correction] keystone correction.
Correct keystone manually.
[Keystone Correction]
Default value is 0.
[Front]: The device is located
in front of the projection
surface.
[Rear]: The device is located
behind the projection surface.
[Front Ceiling]: The device
is hanging from the ceiling
in an upside down position.
[Projector mode]
The image is rotated by 180
degrees.
[Rear Ceiling]: The device
is hanging from the ceiling
in an upside down position
behind the projection
surface. The image is
rotated by 180 degrees and
horizontal mirrored.
4. App Manager
① Press
to access the home menu, select
[Settings] > [App Manager] and press
② Select an app and check the current version, open
or force stop, check the storage used or clear data, or
uninstall it.
When more than 3 apps are installed, you can
T
select [All] at the bottom line of the home page
to enter the [Apps] page. Select an app and
press in the remote control, and then you
can select [Move To Home] or [Uninstall].
12
5. Other
Press
find more settings.
[Language]
[Keypad Tone]
[Automatic Sleep
Interval]
[Background]
[Automatic
Date&Time]
[Date]
[Time]
[Select time zone] Select time zone.
[Use 24-hour
format]
.
[Check Update]
[Recovery]
to access the home menu, select [Settings]
[General]
Select an on-screen display
language.
Turn on / off the keypad tone.
5 min / 15 min / 30 min
Select a background.
[Date&Time]
Enable / disable automatic date
and time.
Manually set date.
Manually set time.
Select 24-hour format or 12-hour
format.
[Upgrade]
Check if it is the latest version.
Follow the on-screen instructions
to upgrade the software version.
[About]
All data on the built-in storage
will be erased.
EN
13