Tripp-Lite U339-002 Manual Del Propietário página 6

Offline Cloning
3. Insert the 2.5" or 3.5" SATA Slave hard drive
4. Turn on power to the docking station using
5. Press the Clone button twice, pausing for
6. The 25% Progress LED will blink when the
7. When all the blue Progress LEDs are
18-11-290-933613.indb 6
(the drive the cloned data will be copied to)
into the Slave Drive (Bay B) of the docking
station.
the ON/OFF button on the back of the unit.
The red Power LED will illuminate to indicate
power is being received. The red Drive LEDs
will illuminate to indicate a hard drive is
connected to the corresponding port, and
ready for cloning.
several seconds after the first press, and
then release.
cloning begins. The Progress LEDs will
illuminate blue to indicate the percentage of
cloning completed as the process continues.
illuminated solid blue, the cloning process is
complete.
6
12/7/2018 5:34:50 PM