Hammerhead HCSD040 Manual Del Usario página 14

OPERATING INSTRUCTIONS
2. Forward/Reverse Selector
The forward/reverse selector
determines the rotating direction of
the tool and also serves as a tool on/
off switch. With the tool held in the
normal operating position, as shown
in Figure 2.
a. To tighten a screw, rotate
the forward/reverse selector
clockwise.
b. To loosen a screw, rotate
the forward/reverse selector
counterclockwise.
c. To turn off the tool, release the
forward/reverse selector.
3. LED Worklights
Two LED worklights, located on the head of the tool, illuminate when the forward/reverse
selector is rotated. This provides additional light on the surface of the work piece for
operation in lower-light areas. The LED worklights will automatically turn off 20 seconds
after the forward/reverse selector is released.
14
2
FORWARD/
REVERSE
SELECTOR
FORWARD
REVERSE
4V ELECTRICIAN'S SCREWDRIVER