Troubleshooting - SRAM QUARQ Manual Del Usario

T R O U B L E S H O O T I N G
Power Meter does not pair with the computer
make sure the battery contacts are free of corrosion.
Check the magnet position. The magnet should be installed according to the instructions on pages 7-­9.
Once the cadence sensors have been activated, the power meter will begin transmitting messages and
is ready to be paired.
Make sure the proper pairing technique has been followed for your bike computer. The pairing process
If you are using a Garmin
when you are wearing the heart rate monitor/strap. Turn off the ANT+ HRM function if you are not using
a heart rate strap.
G A R M I N ® E D G E 8 0 0
Menu Settings
G A R M I N E D G E 5 0 0
Menu Settings
To view the menu, you must press and hold the Menu button until the menu pops up.
G A R M I N F O R E R U N N E R 3 1 0 X T W AT C H
Mode Settings
Cadence, but no power
Check the magnet position. The magnet should be installed according to the instructions on pages 7-­9.
Zero the power meter using Auto Zero or Manual Zero as described on page 13.
Remove any separate cadence or speed sensors.
14

TROUBLESHOOTING

bike computer with ANT+™ heart rate enabled, calibration will often be faster
®
™
About Edge
About Edge
About Forerunner