Kenwood SMP06 Manual De Instrucciones página 4

before using for the first
time
G
Wash the parts: see 'care &
cleaning'.
key
dispensing lid X 2
sports bottle X 2
sealing ring
blade unit
blade holder
power unit
speed control
to use your smoothie
blender
1 Add ingredients to the bottle. For
best blending performance always
add ice/ frozen ingredients to the
bottle last. Ingredients can be
added up to the 600ml level mark.
G
When adding frozen ingredients
such as frozen fruit, yoghurt, ice
cream or ice do not blend more
than 60g or 3 ice cubes.
2 Fit the sealing ring
unit , ensuring the seal is located
correctly in the grooved area.
G
Leaking will occur if the seal is
damaged or incorrectly fitted.
3 Clip the blade unit
blade holder
4 Hold the underside of the blade
assembly and lower it onto the
bottle, blades down – turn
clockwise to lock
5 Shake to disperse the ingredients.
6 Fit the smoothie blender to the
power unit - line up the tabs on the
bottle with the grooves
power unit and then turn clockwise
until a positive click is heard
7 Select the required speed.
G
When blending recipes that include
frozen ingredients turn the speed
control to 'low' for 5 seconds to
start the mixing process, then turn
the speed control to 'high'.
G
Allow the ingredients to blend until
smooth.
to the blade
into the
.
.
in the
.
8 When the desired consistency is
reached, turn the speed control to
the 'off' position. Turn the bottle
anticlockwise to release it from the
power unit.
9 Turn the bottle the other way up
and unscrew the blade assembly.
10 Fit and lock the lid by turning
clockwise.
G
When you want to drink the
smoothie, simply flip open the lid
cover . The drink can be
consumed straight from the bottle.
hints & tips
G
Note that when the bottle is filled
to max capacity (600ml), this is
approximately two servings.
G
If you do not intend to consume
your smoothie drink immediately,
keep it refrigerated.
G
Ensure your smoothie drink is thin
enough to be able to drink from
the dispensing lid. To make a
thinner smoothie drink add more
liquid.
G
Once your smoothie drink has
reached the desired consistency,
you can use the pulse 'P' to
ensure all ingredients are
thoroughly blended. Use the pulse
'P' to operate the power unit in a
start stop action to control the
texture of your drink.
G
After blending, some drinks may
not be completely smooth due to
seeds or the fibrous nature of
ingredients.
G
Some drinks may separate on
standing, therefore it's best to drink
them straight away. Separated
drinks should be stirred before
drinking.
important
G
Do not blend more than 3 ice
cubes (approx. 60g) at a time.
G
Never blend dry ingredients (eg
spices, nuts) or run the Smoothie
Blender empty.
G
Do not use the Smoothie Blender
as a storage container whilst on
the power unit.
G
Some liquids increase in volume
and froth during blending e.g milk,
so do not overfill and ensure the
blade assembly is correctly fitted.
4