Assigning A Device Role; Programming Mode Options - Gigaset N870 IP PRO Manual Del Usuario

Assigning a device role

Assigning a device role
Your device is shipped as a base station. If you wish to use or reset the base as a DECT Manager/
Integrator, follow these steps:
•
To activate the programming mode keep the front button pressed for a minimum of 10
seconds.
•
2 LEDs indicate that programming mode is on.
•
The 3 options in the programming mode are accessed by pressing the button briefly.
•
To activate an option, keep the button pressed for at least 3 seconds, up to 10 seconds max.
•
Programming mode closes down after 20 seconds of inactivity.
Note that this will delete the original configuration and the user data. If required, make
a backup first.

Programming mode options

Progr. Role
Option
1 Base station
2 Base station
+ DECT Manager
+ Integrator
3 Base station
+ DECT Manager
+ Integrator
with static IP address
4 Base station
+ DECT Manager
4
Gigaset N870 IP PRO
Gigaset N870E IP PRO
gigasetpro.com
IP
IP address assigned automatically
IP address assigned automatically
Static IP:
Subnet mask:
IP address assigned automatically
Passwort
web
configurator
admin
192.168.143.1 admin
255.255.0.0
admin
LED 1 LED 2
green
blue blue
blue
blue green