Connecting To Other Equipment; Using The Menu; Setting The Language; Memorizing Channels - Dynex DX-R13TV Guia Del Usuario

8

Connecting to other equipment

The exact arrangement you use to interconnect various video and audio
components to the television is dependent on the model and features of
each component. Check the owner's manual provided with each
component for the location of video and audio inputs and outputs.
The following connection diagrams are offered as suggestions. You may
need to modify them to accommodate your particular assortment of
components. The diagrams are intended to show component video and
audio interconnections only.
Selecting the video input source:
• Press INPUT to view a signal from another device connected
to your television, such as a VCR or DVD player. AUX displays
on the screen for four seconds after pressing INPUT.
Connecting the television to a VCR
VCR
To Audio/ Video
OUT
Audio/ Video cord (not supplied)
Connecting the television to a camcorder
To play back from a camcorder, connect the camcorder to the television
as shown.
To Audio/
Video OUT
Audio/Video cord (not supplied)
Connecting the television to a video game
console
The television can also be used as a display device for many video games.
However, due to the wide variety of signals generated by these devices
and subsequent connection variations required, they have not all been
included in the suggested connection diagrams. You will need to consult
each component's owner's manual for additional information.

Using the menu

To access the menu using the TV buttons:
To access the menu using the remote control:
To select a setting using the TV buttons:
To select a setting using the remote control:

Setting the language

VIDEO IN AUDIO IN
To select a menu language:
Front of TV
VIDEO IN AUDIO IN

Memorizing channels

Front of the TV
To select TV or cable input:
Setting up the television
To Audio/
Video OUT
Audio/Video cord (not supplied)
Press both of the and
VOL VOL
menu screen appears.
Press MENU/ENTER. The menu screen appears.
Use the and buttons and the
CH CH
buttons.
Use the CH + and CH - buttons and the VOL + and VOL - buttons.
You can choose from three different languages (English, French, and
Spanish) for the on-screen displays.
You must select a language first, before setting other menu options.
1 Press MENU/ENTER. The on-screen language selection screen
appears.
NOTE:
If no buttons are pressed for more than 60 seconds, the menu screen returns
to normal television operation automatically.
2 Press the CH + and CH - buttons to select LANGUAGE, then press
the VOL + button.
3 Press the CH + and CH - buttons to select the desired language:
• English (ENGLISH),
• French (FRANÇAIS), or
• Spanish (ESPAÑOL).
4 Press EXIT to return to the normal screen.
This television is equipped with a channel memory feature which allows
channels to skip up or down to the next channel set into memory,
skipping over unwanted channels. Before selecting channels, they must
be programmed into the television's memory.
To use this television with an antenna, set the TV CABLE menu option to
the TV mode. When shipped from the factory, this menu option is in the
CABLE mode.
Selecting TV or cable
1 Press MENU/ENTER. The menu screen appears.
2 Press the CH + and CH - buttons until the indicator next to CH
SETUP flashes, then press the VOL + button.
VIDEO IN AUDIO IN
Front of the TV
buttons at the same time. The
and
VOL VOL