Auriol AFT 77 A1 Instrucciones De Uso página 47

NOTE
It is possible that no signal can be received
due to the surrounding buildings or because
the distance is too great .
If you are unable to establish an automatic
connection to the outdoor sensor, you can
do this manually:
♦ Press and hold the
the reception signal
outdoor temperature panel 4 .
The temperature station automatically starts to
receive the DCF signal after 3 minutes, irre-
spective of whether the outdoor sensor recep-
tion search has been successful or not .
The reception symbol
panel 1 . If the DCF signal is being received
correctly, the current central European Time
(CET) is displayed on the time panel 1 and
the date and weekday are displayed on the
date panel 3 . In addition, the reception
symbol
time panel 1 .
If the appliance is unable to synchronise with
the DCF signal, you can also set the time
manually (see section Basic settings) or you
can attempt the reception again .
♦ Press and hold the
3 seconds to attempt the reception search
again . The reception symbol
the time panel 1 .
AFT 77 A1
is permanently displayed on the
button 0 until
flashes on the
flashes on the time
button 9 for about
GB │ IE
flashes on
│
■
43