ITU UIT-T J Serie Manual Del Usuario página 249

cabhCtpSetToFactory
SYNTAX
MAX-ACCESS read-write
STATUS
DESCRIPTION
"Setting this object to true(1) causes all the tables in the CTP MIB to
be cleared, and all CTP MIB objects with default values set back to those
default values. Reading this object always returns false(2)."
::={cabhCtpBase 1}
--
-- Parameter and results from Connection Speed Command
--
cabhCtpConnSrcIpType
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP Address type used as the source address for the Connection
Speed Test."
DEFVAL { ipv4 }
::= { cabhCtpConnSpeed 1 }
cabhCtpConnSrcIp OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP Address used as the source address for the Connection
Speed Test. The default value is the value of cabhCdpServerRouter
(192.168.0.1)."
REFERENCE
" Specification Section 6.4.4"
DEFVAL { 'c0a80001'h } -- 192.168.0.1
::= { cabhCtpConnSpeed 2 }
cabhCtpConnDestIpType
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP Address Type for the CTP Connection Speed Tool destination
address."
DEFVAL { ipv4 }
::={ cabhCtpConnSpeed 3 }
cabhCtpConnDestIp
SYNTAX
MAX-ACCESS
STATUS
DESCRIPTION
"The IP Address used as the destination address for the Connection
Speed Test."
::= { cabhCtpConnSpeed 4 }
OBJECT-TYPE
TruthValue
current
OBJECT-TYPE
OBJECT-TYPE
OBJECT-TYPE
InetAddress
read-write
current
Rec. UIT-T J.191 (03/2004) 243