Tabla de contenido
Publicidad
cabhCdpObjects
OBJECT IDENTIFIER ::= { cabhCdpMib 1 }
cabhCdpBase
OBJECT IDENTIFIER ::= { cabhCdpObjects 1 }
cabhCdpAddr
OBJECT IDENTIFIER ::= { cabhCdpObjects 2 }
cabhCdpServer
OBJECT IDENTIFIER ::= { cabhCdpObjects 3 }
--
--
The following group describes the base objects in the Cable
--
DHCP Portal. The rest of this group deals with addresses defined on
--
the LAN side.
--
cabhCdpSetToFactory
SYNTAX
TruthValue
MAX-ACCESS
read-write
STATUS
current
DESCRIPTION
"Setting this object to true(1) causes the DHCP default options to
be returned back to factory defaults. Reading this object always returns
false(2). When cabhCdpSetToFactory is set to true, the following actions occur:
1. Clear all cabhCdpLanAddrEntries in the CDP LAN Address Table.
2. Reset all default CDS DHCP options to the factory defaults.
3. The CDS will offer the factory default DHCP options at the next lease renewal
time.
The objects set to factory defaults are:
cabhCdpLanTransThreshold,
cabhCdpLanTransAction,
cabhCdpWanDataIpAddrCount,
cabhCdpLanStartType,
cabhCdpLanPoolStart,
cabhCdpLanPoolEndType,
cabhCdpLanPoolEnd,
cabhCdpNetworkNumber,
cabhCdpServerSubnetMaskType,
cabhCdpServerSubnetMask,
cabhCdpServerTimeOffset,
cabhCdpServerRouterType,
cabhCdpServerRouter,
cabhCdpServerDnsAddressType,
cabhCdpServerDnsAddress,
cabhCdpServerSyslogAddressType,
cabhCdpServerSyslogAddress,
cabhCdpServerDomainName,
cabhCdpServerTTL,
cabhCdpServerInterfaceMTU,
cabhCdpServerVendorSpecific,
cabhCdpServerLeaseTime,
cabhCdpServerDhcpAddressType,
cabhCdpServerDhcpAddress"
REFERENCE
""
::= { cabhCdpBase 1 }
cabhCdpLanTransCurCount OBJECT-TYPE
SYNTAX
Unsigned32
MAX-ACCESS
read-only
STATUS
current
DESCRIPTION
"The current number of LAN-Trans IP addresses for
Translated addresses (NAT and NAPT Interconnects).
This is a count of LAN side addresses."
REFERENCE
""
::= { cabhCdpBase 2 }
OBJECT-TYPE
Rec. UIT-T J.191 (03/2004)
257
Publicidad
Tabla de contenido
