Tabla de contenido
Publicidad
cabhSecFwPolicyFileCurrentVersion OBJECT-TYPE
SYNTAX
SnmpAdminString
MAX-ACCESS
read-only
STATUS
current
DESCRIPTION
"The rule set version currently operating in the PS device.
This object should be in the syntax used by the individual
vendor to identify software versions.
return a string descriptive of the current rule set file load.
If this is not applicable, this object MUST contain an empty
string."
::= { cabhSecFwBase 5 }
--
--
Firewall log parameters
--
cabhSecFwEventType1Enable OBJECT-TYPE
SYNTAX INTEGER {
enable (1), -- log event
disable (2) -- do not log event
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object enables or disables logging of type 1 firewall event
messages. Type 1 event messages report attempts from both private and public
clients to traverse the firewall that violate the Security Policy."
DEFVAL { disable }
::= { cabhSecFwLogCtl 1 }
cabhSecFwEventType2Enable OBJECT-TYPE
SYNTAX INTEGER {
enable (1), -- log event
disable (2) -- do not log event
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object enables or disables logging of type 2 firewall event
messages. Type 2 event messages report identified Denial of Service attack
attempts."
DEFVAL { disable }
::= { cabhSecFwLogCtl 2 }
cabhSecFwEventType3Enable OBJECT-TYPE
SYNTAX INTEGER {
enable (1), -- log event
disable (2) -- do not log event
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables logging of type 3 firewall event messages. Type 3 event
messages report changes made to the following firewall management
parameters: cabhSecFwPolicyFileURL, cabhSecFwPolicyFileCurrentVersion,
cabhSecFwPolicyFileEnable."
252
Rec. UIT-T J.191 (03/2004)
Any PS element MUST
Publicidad
Tabla de contenido
