RCA RSWW1 Guia De Instalacion página 14

(continued)
Step 5
B. Connect the middle lead from the smart module to the lead from the servo.
Smart
Module
Servo
C. Connect the third cord from the smart module to the DC In jack on the control
box.
Smart
Module
Servo
14
Use the included wire ties to gather the wires and
stick them to the wall so that they're out of the way.
Control
Box
Clean the wall first. Then stick the back of the wire
tie to the wall. Use the other wire tie closer to the
control box to gather the wires there as well.
Control
Box
DC In