RCA RSWW1 Guia De Instalacion página 18

(continued)
Step 6
E. Confirm your Smart Module is connected and select it
18
Your Smart Module should be listed in the devices available in the next screen. The Link
indicator on its front panel goes solid and the Activity indicator starts blinking.
NOTE: If more than one Smart Module are in same area and in SETUP mode, all of them connect to your WiFi
network in this step.
Choose the Smart Module you want to use from the list that appears (check the MAC
address shown against the MAC address you wrote down on page 4).
Press the Select button next to the Smart Module you want to add. Then press Next at
the bottom of the screen.
The App finishes setting up the Smart Module with your WiFi network and displays a
sample alert to verify that it's up and running. In this alert screen, you have the following
options:
accesses your phone's alert settings so that you can modify the App's
permissions.
Edit name lets you choose a different name for your system in the alert screens. You
can choose one of the preset names or create your own.
accesses your notification history, which shows all of the times the App has sent
alerts and what those alerts were.
Unselect removes this Smart Module from alerts. (You'll have to re-select it again.)
Configure accesses other setup options.
Search looks for Smart Modules in your WiFi network.
Done exits the screen.