Hozelock Auto Reel 2490 Manual De Instrucciones página 5

flat ended screwdriver in the slot.
If the leak is from the hose
connector, tighten the hose nut.
If the leak is from beneath the hose
connector, follow these instructions.
1. Remove the two screws holding
the hose connector.
2. Remove and replace the "O" ring
(spare part no Z73045). Grease the
"O" ring using petroleum jelly.
3. Tighten the hose nut.
4. Re-assemble.
Tension adjustment
The spring tension is factory pre-set
and will not require any
adjustment.
Hose replacement
If the 20m watering hose becomes
damaged, do not attempt to repair
it. Contact Hozelock Consumer
Services for a replacement kit and
instructions, requesting spares
number Z21915.
Wall bracket kit
If the wall bracket or pivot tube
become damaged, a replacement kit
is available, requesting spares
number Z21925.
Advice and spares
For product advice and spares,
please contact:
Hozelock Consumer Services,
Hozelock Ltd., Midpoint Park,
Birmingham B76 1AB
Tel: 0121 313 1122
GUARANTEE
This Auto Reel is guaranteed for 2
years against faults arising from
defective manufacture or materials.
The hose is guaranteed for 15 years
against defective manufacture or
materials.
Please keep your purchase receipt.
www.hozelock.com
A
B
CONTENTS
A Main body
B Pivot tube
C Bracket
D Nozzle
E Water inlet hose
F Wall plugs
G Screws
H Threaded tap connector
(with adaptors
if required)
I Waterstop
connector
J Hose end
connector
K Side disc
C
F
PART NO.
- 93273
- 83360
- 83359
- 2292
- 93411
- 53025 x 4
- 53097 x 4
- 2175
- 2185
- 2166
- 83304
K
H
D
I
J
Stop
G
E
5