eurodent Iso Plus Manual Del Usuario página 63

After packing the container properly by means of the suitable
polystyrene shells, put it into the carton box.
Now, proceed to close the forwarding case in the following way:
- Place the middle tongue in its housing (picture 7)
Fig. 7
- Fold the right and left safety tongues as described below:
a) Fold the pointed ends upwards and inwards (picture 8).
Fig. 8
b) By providing a firm pressure, compress the pointed ends (picture 9).
Fig. 9
c) Then, insert tongue into the proper slot, by folding the pointed
ends (these last ones have to be turned downwards - picture 10).
ATTENTION!
If you unfold the tongues, the case will be damaged!
Finally, send the case to the factory in charge of waste treatment.
Fig. 10
METASYS
61