Basic Operations; Changing Channels; Adjusting The Volume; Using The Mute - Insignia IS-LCDTV32 Guia Del Usuario

IS-LCDTV32.fm Page 15 Friday, May 20, 2005 12:47 PM
IS-LCDTV32 32-inch Color TV

Basic Operations

Changing Channels

Using the Channel Buttons (CH+ or CH-)
• Press the CH+ or CH- to change channels.
When you press the CH+ or CH-, the unit
changes channels in sequence. You will see
all the channels that the unit has memorized.
You will not see channels that were erased.
Direct Accessing Channels
1 Press the number buttons to go directly to a
channel.
2 To select a one-digit channel: Input the
channel using the 0-9 number button,then
press Channel Enter button to confirm.
3 To select a two-digit channel: Input the
channel using the 0-9 number button,then
press Channel Enter button to confirm.
4 To select a three-digit channel: Input the
channel using the 0-9 number button directly.
Note When you use the number buttons, you can
directly select channels that were erased.
Using the Return button
• Press this button to switch between the
current channel and the previous channel.

Adjusting the Volume

Using the volume buttons (VOL+ and VOL-)
• Press the VOL + or VOL- to increase or
decrease the volume.

Using the Mute

Using the Mute button
At any time, you can temporarily cut off the
sound using the Mute button.
1 Press the mute
off.
2 To turn mute off, press the mute
again.

Selecting Input Source Signal

1 Press the Source button to access Source
Select menu.
2 Press CH+ or CH- to select a desired input
source.
button and the sound cuts
button
www.insignia-products.com
3 Press Enter to confirm and the unit displays
signal from the selected input source.
VGA • Select signal from D-sub jack.
DVI • Select signal from DVI
terminals.
RF • Select TV signal.
Video1 • Select signal from AV1 IN
terminals.
Video2 • Select signal from AV2 IN
terminals.
SVideo • Select signal from S-video
terminal.
YPbPr • Select signal from YPbPr.

Selecting a Menu Language

1 Press Menu to display the menu main page.
2 Press CH+/- repeatedly to select OSD item.
3 Press Enter to access the submenu.
The Language item will be highlighted
automatically.
4 Press Enter to toggle between English,
French and Spanish.
5 Press Menu to exit.
15