Assembly Instructions - Blackstone 1819 Manual Del Propietário

ASSEMBLY INSTRUCTIONS

STEP 1
Remove the Griddle & Charcoal Grill Combo from the box
and lay the unit upside down on the flat surface as shown
in the diagram below.
STEP 2
Install the 2 wheels to the right legs and using both braces
assemble the right legs together with 4 M6x12 screws.
Using an addition M6 Screw and Nut add the propane
tank hanger to the top leg support.
Propane tank
hanger hardware
STEP 3
Install the legs to the body with 8 M6x12 screws being
sure the threaded holes and propane tank hanger are
facing outwards.
Propane
tank hanger
Threaded
hole
8
www.blackstoneproducts.com
STEP 4
Place the Griddle & Charcoal Grill Combo on it's legs
and secure the bottom shelf as well as the propane tank
support with the thumb screws, inserting them from the
outside of the unit as shown in the diagram below.
STEP 5
Install the side shelf with 2 M6x12 screws and press the
side shelf downward to lock in place.Hand-tighten the
propane regulator collar to the griddle. Be careful to not
over tighten.
STEP 6
Press the knob in place as shown in the diagram below.
M6x12
Screws
Propane tank
support
M6x12 screws
Propane
Regulator Collar
Knob