Removing Segments (Fig. D); How To Exchange The Pin Inside The Slider (Fig. E,F,G) - Auriol HG01480A Instrucciones De Utilización Y De Seguridad

Removing Segments (Fig. D)

Note: The segments which can be removed are marked with an
arrow (see Fig. D). They are connected together with pins. These can
be pushed out in the direction of the arrow with the repair set
a pair of tweezers if necessary in order to remove the pins.
Place the watch with the dial facing downwards in the repair set
.
8
Remove the pins of the segment that you wish to remove (as
described above) and take out the segment
Note: If you would like to take out more than one consecutive
segment
Connect the watch strap together again by joining the loose
segments
arrow into the adjacent segments
How to exchange the pin inside the slider
(Fig. E,F,G)
Take out the slider
pin inside.
10
You will need the pliers to carefully remove the old pin from the
16 GB/IE
, it is sufficient to remove the two outer pins.
7
with a pin. Press this pin against the direction of the
7
, open the bottom cover
9
.
7
.
7
with the spare
11
. Use
8