Residual Risks; Environmental Protection - Ryobi OPP1820 Traducción De Las Instrucciones Originales

MAINTENANCE SCHEDULE
The bar may be reversed to distribute wear for maximum
life. The bar should be cleaned every day of use and
checked for wear and damage.
Daily check
Bar lubrication
Chain tension
Chain sharpness
For damaged parts
For loose fasteners

RESIDUAL RISKS

Even when the product is used as prescribed, it is still
impossible to completely eliminate certain residual risk
factors. The following hazards may arise in use and the
operator should pay special attention to avoid the following:
■ injury caused by vibration
Always use the right tool for the job. Use designated
handles and restrict working time and exposure.
■ injury caused by noise
Exposure to noise can cause hearing injury. Wear ear
protection and limit exposure.
■ injury from contact with the exposed saw teeth of the
chain
■ injury caused by kickback or sudden and unforeseen
movement of the guide bar
■ injury caused by ejected parts of the saw chain
■ injury caused by thrown-off parts of the workpiece
(wood chips and splinters)
■ injury caused by dust and particles
■ injury caused by skin contact with the lubricant or oil
RISK REDUCTION
It has been reported that vibrations from handheld tools
may contribute to a condition called Raynaud's Syndrome
in certain individuals. Symptoms may include tingling,
numbness, and blanching of the f ngers, usually apparent
upon exposure to cold. Hereditary factors, exposure to
cold and dampness, diet, smoking, and work practices
are all thought to contribute to the development of these
symptoms. There are measures that can be taken by the
operator to possibly reduce the effects of vibration:
■ Keep your body warm in cold weather. When operating
the unit wear gloves to keep the hands and wrists
warm. It is reported that cold weather is a major factor
contributing to Raynaud's Syndrome.
Before each use
Before each use and
frequently
Before each use, visual
check
Before each use
Before each use
■ After each period of operation, exercise to increase
blood circulation.
■ Take frequent work breaks. Limit the amount of
exposure per day.
If you experience any of the symptoms of this condition,
immediately discontinue use and see your doctor about
these symptoms.
WARNING
Injuries may be caused, or aggravated, by prolonged
use of a tool. When using any tool for prolonged periods,
ensure you take regular breaks.

ENVIRONMENTAL PROTECTION

Recycle raw materials instead of disposing
of as waste. The machine, accessories and
packaging should be sorted for environment-
friendly recycling.
KNOW YOUR PRODUCT
See page 170.
1. Chain lubricant cap
2. Extension pole
3. Shaft coupling
4. Harness hanger
5. Harness
6. Front hand grip
7. Trigger release
8. On/off trigger
9. Chain
10. Guide bar
11. Sprocket cover
12. Bar nut
13. Ribbed bumper
14. Chain tensioning screw
SYMBOLS ON THE PRODUCT
Safety alert
Read and understand all instructions.
Avoid using in wet or damp conditions.
Electrical hazard. Keep at least 10 m
10m
away from the overhead lines.
EN
English
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR
5