Bose SOUNDDOCK Guía De Usario página 9

Ocultar thumbs Ver también para SOUNDDOCK:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 28
English
To remove an insert from the dock
1. With your thumbs on the front of the dock near the Bose
pinch until the rear of the insert lifts up (Figure 8).
2. Lift out the insert and replace it with the one you need.
Figure 8
Removing an
insert
Troubleshooting
Problem
Your iPod does not dock
properly
No sound
No sound and your iPod
is not charging
What to do
Make sure the dock insert is the proper fit for your iPod
(refer to "Using the correct insert" on page 5).
Remove your iPod from the dock and check for obstructions on the connectors
in the dock and on your iPod. Then reseat it in the dock.
Make sure the system is plugged in, your iPod is turned on, and a music track is
selected and playing.
Press the Play/Pause button on the remote control.
Increase the volume setting for the system.
Remove your iPod from the dock, wait briefly, then reseat it. You may need to do
this a few times.
Make sure your iPod is running compatible software
(refer to "To check for iPod compatibility" on page 6).
Make sure the power cable is securely plugged into a functioning wall outlet and
the symbol on the small connector is matched to the one on the back of the
TM
SoundDock
system. Refer to Figure 4 on page 6.
Make sure your iPod is firmly seated in the dock.
E
XPERIENCE THE
®
logo, and your index fingers inside it,
S
OUND
9

Publicidad

Tabla de contenido
loading

Tabla de contenido