Toggle Between °C And °F Scaling; Battery Replacement; Important; Resetting The Unit - Danfoss TP4000 Range Instrucciones De Usuario

2.9 Toggle between °C and °F scaling
To change between °C and °F scaling. Press V and - together to
toggle between °C and °F temperature scaling.
GB GB

3.0 Battery Replacement

When batteries are low a battery symbol will
FR
fl ash in the LCD display. You have 15 days to
replace the battery before the unit switches
ES
off .
When changing batteries, remove old batteries and insert new ones
NL
within one minute and programming will not be lost.
GR
IMPORTANT: always use high quality alkaline batteries
!
NB. If the display ever goes blank during normal operation, the
PL
batteries will need to be renewed, the unit reset and the time
reprogrammed. The event times and temperatures will be retained.
CZ

4.0 Resetting the unit

TR
Partial reset: Press RESET (used to restart micro-computer) if display
HR
freezes for any reason. This does not reset any programme, clock or
date. It is recommended that this is done at time of installation.
RO
User full reset: Press RESET whilst holding down PROG button. This
resets event times and and temperatures back to the factory presets.
HU
The unit must be re-programmed. The correct time will be retained.
LT
10 TP4000