Using your machine:
1
3
WARNING
This vacuum cleaner has a constantly rotating brush roll when the
brush roll 'ON' is selected. Never leave the vacuum cleaner in one spot
for an extended period of time as this may damage the floor surface.
The brush roll should be ON for carpets and OFF for hard floors.
12
Squeeze the trigger located
underneath the handle, the machine
will switch 'On'. The On/Off and
charging light will illuminate green
indicating the power is on and the
machine is charged. Release the
trigger to switch the machine 'Off'.
Press the brush roll's On/Off button
to go between carpet and hard floor
mode. The brush roll will spin for
carpet mode.
!
Squeeze the trigger and pull the
'Continuous Power Lever' towards
the trigger. This will lock it into the
'On' position and will continue to
power the machine without having
to hold in the trigger. Push the lever
away from the trigger to unlock and
2
release the trigger.
When the vacuum cleaner is in use
the On/Off and charging light will
illuminate and flash red when the
battery is running low. When the red
light flashes the machine will turn
off in 20 seconds. The user should
recharge the battery.
4
WARNING
!
Risk of personal injury – the brush roll may
suddenly restart. Turn power switch Off
and remove the battery before cleaning of
servicing the brush roll.