Technical Data; Noise Information; Vibration Information - Worx WX125 Traducción De Las Instrucciones Originales

TECHNICAL DATA

Voltage
No load speed
Number of clutch positions
Max torque
Chuck capacity
Max. drilling capacity
Machine weight

NOISE INFORMATION

A weighted sound pressure
A weighted sound power
K &K
pA wA
Wear ear protection when sound pressure is over

VIBRATION INFORMATION

Vibration total values (triax vector sum) determined according to EN 60745:
Drilling into metal
wARNING: The vibration emission value during actual use of the power tool can differ
from the declared value depending on the ways in which the tool is used dependant on the
following examples and other variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained.
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately
managed.
wARNING: To be accurate, an estimation of exposure level in the actual conditions of use
should also take account of all parts of the operating cycle such as the times when the tool
is switched off and when it is running idle but not actually doing the job. This may significantly
Lithium-ion cordless drill/driver
Steel
Wood
Vibration emission value a
Uncertainty K=1.5m/s
0-350 / 0-1300/min
14/24N.m
L
pA
L
wA
=1.24m/s
2
h
2
12 V
15+1
10mm
10mm
20mm
1.0kg
:73dB(A)
:84dB(A)
3.0dB(A)
80dB(A)
7 7
EN