Heathrow Scientific Vortexer Manual De Instrucciones página 4

Specifications
Product Description/Features:This device is a benchtop laboratory Vortexer with a variable speed
control (OFF, and up to approx. 3000 rpm), capable of vortexing microplates and 6 different tube
sizes with the convenience of a single mixing head attachment. This Vortexer has enough flexibility to
perform the standard tasks that a vortex mixer is required to perform, plus it has the ability to hold a
variety of tubes, containers, and microplates all within one mixing head design.
Supplied Equipment and Spare Parts:
• 1 ea. Vortexer (classified as Installation Category 2)
HS120209, US/North America: 120VAC (110V – 120V, 50-60 HZ, 55 Watts, 1.0 Amps)
HS120318, Japan (PSE cord): 100VAC (100V – 110V, 50-60 Hz, 66 Watts, 1.3 Amps)
HS120214, United Kingdom: 230V (220V – 240V, 50-60 Hz, 44 Watts, .4 Amps)
HS120212, EU: 230VAC (220V – 240V, 50-60 Hz, 44 Watts, .4 Amps)
HS120210, Australian: 230VAC (220V – 240V, 50-60 Hz, 44 Watts, .4 Amps)
• 1 ea. AC power cord (WARNING only use power cords supplied by Heathrow Scientific):
HS120329: N. America
HS120488: Japan PSE rated
HS120331: UK
HS120332: CE
HS120333: Australia
• 1 ea. mixing head, HS120327
• 3 additional elastic retention cords, HS120422
• 3 additional central pads for intermittent mixing area, HS120328
Technical Features:
Speed range:
From 0 to approximately 3000 rpm - shaking to vortexing
Operation:
1) 3-position slider power switch:
Top position: Intermittent operation
Center position: OFF
Bottom position: Continuously ON
2) Infinite position rotary speed control for speeds from Off up to approximately 3000 rpm
Dimensions: 6.75" W x 7.5" D x 6" Height of main unit. 7.75" Height with Mixing Head attached.
(171mm W x 190mm D x 197mm H)
Weight: 8.66 lbs (3.93 kg) – total Vortexer weight with Mixing Head attached
Orbital Diameter: 3.7mm
Electrical: See HS part numbers listed above.
Note: Product has a Thermal Protection Device.
Environmental:
For Indoor Use Only
Altitude: up to 2,000 m
Operating Temperature: 2˚ C to 40˚ C (35.6˚ F to 104˚ F), Max. Humidity
95%Max. Relative Humidity ≤ 80% non-condensing
This mark is the confirmation that the unit conforms to the EU guidelines and has
been tested according to the following EU Declaration of Conformity.
Conforms to:
ANSI/UL Std. 61010-1 ANSI/UL Std. 61010-2-051
IEC/EN 61010-1
IEC/EN 61010-2-051
CAN/CSA C22.2 No. 61010-1 CAN/CSA C22.2 No. 61010-2-051
710213
This Product is in Compliance with: RoHS 3, PSE Certified Cord (Japan), WEEE
4