Tabla de contenido
Publicidad
Fan Operating Instructions
NOTE: The exhaust hoses are not required
during FAN only mode operation.
The external water tank is not required
during FAN only mode operation.
1) Press the I/O (on/off) key pad to switch on
the unit.
2) Press the MODE key until the word FAN appears
in the display window. Each depression of the
MODE key will advance to a different mode
setting (Cool-Dry-Fan).
3) Press the FAN key to select the desired FAN
SPEED setting. Your selection will appear in the
display window. Each depression of the fan key
will advance to a different fan speed (Low-Med-
High).
4) Press the SWING key to activate the automatic
air swing (oscillating) feature (the air swing
symbol will appear in the display window).
To deactivate the air swing feature, press the
SWING key again.
5) To adjust "air flow" direction, (up / down only)
adjust the center Horizontal Louver Blade and
the remaining louvers will automatically adjust to
the same position. Fig. 25
Fig. 25
I/O
13
MODE
FAN
Publicidad
Tabla de contenido
