Danby DPAC10030 Manual De Instrucciones página 32

Tabla de contenido

Publicidad

You can varify the AUTO-OFF time selected anytime
(prior to the program ending) by pressing the
TIMER-OFF key pad. The time you selected will
appear in the display.
Setting the AUTO-ON & AUTO-OFF timer
during the same program.
Before setting the AUTO-ON & AUTO-OFF Timer,
the time of day clock must be set/operational.
You must select all appropriate settings (i.e. MODE,
FAN SPEED, TEMP, HUMIDITY, SWING etc.)
required to operate under the AUTO TIMED
program before initiating the program.
1) Select the appropriate MODE under which
you want the unit to operate (Auto-Cool-Dry-
Fan).
2) Select the appropriate FAN SPEED setting,
under which you want the unit to operate. (Auto,
Hi, Med, Low) (excluding Dehumidifying, as
this mode has "1" fan speed setting only).
3) Select SWING (oscillation) by pressing the
SWING key pad and the "air swing" symbol will
appear in the display window.
4) Press the TIMER-ON key pad to initiate the
AUTO-ON time sequence. TIMER-ON will appear
in the display window and the "minute" digits start
to flash. Press either
keys to select the AUTO-ON "minutes". Press the
TIMER-ON key pad again and the "hour" digits start
to flash. Press the
pad to select the AUTO- ON "hour" start time. Press
the TIMER-ON key pad again and the display will
stipulate, CLOCK / ON / and the set AUTO-ON time
.
5) Press the TIMER-OFF key pad to initiate the
AUTO-OFF time sequence. TIMER-OFF will
appear in the display window and the "minute"
digits start to flash.Press the
TEMP/TIME ADJ key pad to select the AUTO-
OFF "minute" time. Press the TIMER-OFF key
pad again and the "hour" digits start to flash.
Press the
or
to select the AUTO-OFF "hour" stop time. Press
the TIMER-OFF key pad again and the display
will stipulate, CLOCK / ON / OFF and the current
time of day will appear in the display window.
The unit will now "start" and "stop" automatically
at the specified AUTO-ON / AUTO-OFF times.
You can varify the selected AUTO-ON / AUTO-OFF
times by pressing the TIMER-ON / TIMEROFF key
pad. The time you selected will appear in the
display.
16
TEMP/TIME ADJ
or
TEMP/TIME ADJ key
or
TEMP/TIME ADJ key pad

Publicidad

Tabla de contenido
loading

Tabla de contenido