Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Icon
Mode or function
Comfort
Night
Antifrost
Fil-Pilote
Crono
Boost 2h
Key-lock
Eco
Open Window Detection
ASC
Stand-by
Power ON / Stand-by
Press the
ON/STAND-BY key to switch on the device or to enter the Stand-by mode.
When the device is switched on, the display shows the set temperature, mode and time.
In Stand-by mode the current time and day of the week are displayed.
This button activates the same function as the fan's "ON/STANDBY" button.
Neither enjoys precedence over the other.
Operating modes
Press the
MODE key to select the desired operating mode, an icon on the display indicates the
selected operating mode (as in the legend below).
Stand-by
Fil-Pilote
Comfort Mode
The temperature Comfort corresponds to the temperature that the user desires.
This operating mode is intended for the ordinary employment of the thermostat.
• Press the
MODE key until the
• Set the desired temperature through the
• LED A orange: resistance OFF
• LED A red: resistance ON
Description
It enables and sets the temperature in the
Comfort mode
It enables and sets the temperature in the Night
mode
It enables the Antifrost mode
It enables and sets the temperature in the Fil-
Pilot mode
It enables the Crono mode
It switches on the device set on the maximal
power for two hours
It enables the keypad lock
It enables the ECO function
It enables the Open Window Detection
function
It enables the ASC function
The device enters the Stand-by mode
Confort
Nuit
Comfort icon is shown on the display.
and
keys (maximum temperature 32 °C)
[ 34 - EN ]
Antigel
Chrono
Publicidad
Tabla de contenido
