Microsoft Windows Xp - D-Link AirPlus Xtreme G DWL-G132 Guía De Instalación Rápida

Appendix C - IP Address Configuration
To connect to a network, make sure the proper network
settings are configured for the DWL-G132.
For

Microsoft Windows XP:

right click on My Network Places
> select Properties > Double-click on the Network
Connection associated with the Ethernet adapter (i.e.,
D-Link DWL-G132).
Click Internet Protocol (TCP/IP)
Click Properties
Dynamic IP address setup
Used when a DHCP server
the local network. (i.e. Router)
Select Obtain an IP address
automatically
Router or Access Point has
DHCP server enabled)
Select Obtain DNS server
address automatically
Click OK
Static IP address setup
Used when a DHCP server
on the local network.
Select Use the following IP address
IP address: 192.168.0.28
Subnet mask: 255.255.255.0
Input a static IP address in the same range as
the Wireless Router or Access Point.
Click OK
icon on the desktop
is available on
(if the Wireless
is not available
10