Gas Connection (To Be Completed By Approved Gas Installer) - bora PG 11-000 Instrucciones De Instalación, Operación Y Mantenimiento

Gas connection (to be completed by approved gas installer)

■ The built-in gas hob is a class 3 gas appliance.
■ The factory settings for gas type are indicated on the type plate at the bottom
of the hob or on the type plate of the control unit.
■ The control unit is equipped with a flexible connecting hose. This hose allows
for the proper connection to rigid gas pipes without any
stress on the control unit housing.
Do not tighten the nut at the control unit!
The connection has been checked for
tightness at the factory!
Examples of gas hose installation
Gas supply from the rear
Connecting hose
■ Bend the connecting hose so that it fits tightly to the elbow piece or the rigid
gas pipe.
Control unit
Elbow piece
Rigid gas pipe
Gas supply line
Gas supply from the side
Control unit
Connecting hose
Elbow piece
Rigid gas pipe
Gas supply line
17