Qstarz BT-Q818X Guía De Instalación Rápida página 4

English
................................................................................................................................................................................................................
F. Switch to eXtreme 5Hz sports mode and activate
A‐GPS by QstarzGpsView software application
To activate these two functions, an USB cable and driver installation
are needed. Please prepare an USB cable and install the driver.
Driver could be downloaded from our website:
www.qstarz.com
1. Connect BT‐Q818X with your PC by mini‐USB cable.
2. Switch BT‐Q818X on.
3. Execute QstarzGpsView.exe from Driver CD
"Tools\QstarzGpsView.exe".
4. Select COM port (To find the valid com port, please go to <Device
Manager> and expand the <Ports (COM & LPT)> and check "GPS USB
Serial Interface Driver") and set the baud rate to
5. Click On button to establish the communication between
BT‐Q818X and your PC. If the connection is successful, the NMEA
stream will keep showing.
6. Click Setup tab, and you can change to eXtreme Sport mode under
Fix Update Rate. The higher number means the device can bear
extremer environment. After select an update rate, click Set to save
the setting.
7. Click Update button under AGPS to update the almanac data. The
program will connect to assistance server and download almanac
data automatically. You can also check the effective period of AGPS
by clicking Query. Clear almanac data by clicking Reset.
Note1: A‐GPS can boost GPS warm start speed to always lower than
15sec fix after the first fix. The A‐GPS efficiency will decrease
when time goes by. If it expires, you would have to download
almanac data again or delete it because the acceleration
efficiency of fix will become totally ineffective.
.........................................................................................................................................................................................
4
115200
.
www.Qstarz.com