Timer - Caso Blue Two Manual De Usuario Original

15.4.5

Timer

caso Blue Two
 Press the menu key to select the timer function. The
corresponding indicator lights up and the display shows ―0‖ and
blinks.
 You can now set the time by turning the dial to the right or to
the left. The maximum time that can be set is 180 minutes.
 Turning the dial quickly increases or decreases the time in 10-
minute steps (10, 20 ...), turning it slowly increases or
decreases the time in 1-minute steps.
 Once the time has been set, it will be displayed within 5
seconds, the indicator stops to blink and the time is counted
down.
 After the set time has elapsed, an acoustic signal is emitted 5
times and the device switches to stand-by mode.
 Should no time be set, the indicator in the display blinks, briefly
shows --- and then turns to previously set mode – either power
or temperature.
 If neither the power mode nor the temperature mode was
selected, the device automatically selects power mode P-6.
 The time or mode, together with the selected conditions, are
alternately displayed every 5 seconds. Otherwise, the device
automatically switches to power mode and displays P-6.
Operation and Handling
59