D-Link EasySmart Guía De Introducción página 4

SmartConsole Utility
The SmartConsole Utility included on the installation CD
is a program for discovering EasySmart Switches with
the same L2 network segment connected to your PC.
This tool is only for computers running Windows 2000,
Windows XP, and Windows Vista x64/86 operating
systems. There are two options for the installation of
SmartConsole Utility, one is through the autorun program
on the installation CD and the other is manual installation.
Note: Please be sure to remove any existing
SmartConsole Utility from your PC before installing the
latest SmartConsole Utility.
Option 1: Follow these steps to install the
SmartConsole Utility via the autorun program on the
installation CD.
1. Insert the Utility CD into your CD-Rom Drive.
2. The autorun program will pop up automatically
3. Simply click on the "Install SmartConsole Utility"
button and an installation wizard will guide you
through the process.
4. After successfully installing the SmartConsole Utility,
you can open the utility by clicking Start > Programs
> D-Link SmartConsole Utility.
5. Just connect the EasySmart Switch to the same L2
network segment
SmartConsole Utility to discover the EasySmart
Switches.
Option 2: Follow these steps to install the
SmartConsole Utility manually.
1. Insert the Utility CD into your CD-Rom Drive.
2. From the Start menu on the Windows desktop,
choose Run.
3. In the Run dialog box, type D:\D-Link
SmartConsole Utility\setup.exe (where D:\
represents the drive letter of your CD-Rom) and
click OK.
4. Follow the on-screen instructions to install the utility.
5. Upon completion, go to Start > Programs > D-Link
SmartConsole Utility and open the SmartConsole
Utility.
6. Just connect the EasySmart Switch to the same L2
network segment of your PC and use the
SmartConsole Utility to discover the EasySmart
Switches.
For a detailed look at SmartConsole's functions, please
refer to the SmartConsole Utility introduction in the user
manual.
of your PC and use the
4