100%Chef Twin Stones TWS-001 Manual Tecnico De Usuario página 27

Troubleshooting
PROBLEM
Grinding takes more time a. Overload in the drum.
Grinder gets more heated
up than usually
In case of any doubts contact the nearest 100%Chef Distributor.
26 Cocina Sin Límites, S.L.
CAUSE
b. Incorrect wiper guide.
c. Low voltage.
d. The top lock not tightened fully.
a. Overload in the drum.
b. Low voltage for power supply.
c. Thick paste formation in the
drum.
d. Grinder is near a heat source.
e. Ventilation of the grinder is
blocked.
REMEDY
a. Place them in the right
position.
b. Correct the position.
c. Check the input voltage.
d. Tighten the top lock.
a. Take out the excess quantity.
b. Switch off grinder and wait
until the voltage stabilizes.
c. Add water as required.
d. Change the position of
grinder/heat source.
e. Remove the blockage.
www.100x100chef.com