Strike Plate; Black 1-7/8" Flat Head Screw; Black 1/2" Flat Head Screw - Sauder Transit L Desk 414417 Manual De Instrucciones

Step 14
Fasten a PIVOT HINGE (15H) to the FLIP DOWN DOOR (O). Use
å
a BLACK 9/16" LARGE HEAD SCREW (1S).
Fasten the STRIKE PLATE (6I) to the FLIP DOWN DOOR (O). Use
å
a BLACK 1/2" FLAT HEAD SCREW (11S).
NOTE: The surface of the STRIKE PLATE with "SAUDER" should
å
be facing up.
Insert a PIVOT HINGE (15H) into the WASHERS (9I) and into the
å
CENTER UPRIGHT (D).
Insert the PIVOT HINGE, which is fastened to the FLIP DOWN
å
DOOR (O), into the hole in the UPRIGHT (C). You will need to tilt
your DOOR slightly.
Now, tip the FLIP DOWN DOOR (O) in and fasten the free HINGE
å
to the DOOR. Use a BLACK 9/16" LARGE HEAD SCREW (1S).
15H
BLACK 9/16" LARGE HEAD SCREW
(2 used for the PIVOT HINGES)
Page 18
O
6I
1S
15H
O
C

BLACK 1/2" FLAT HEAD SCREW

(1 used for the STRIKE PLATE)
9I
9I
D
414417
11S
www.sauder.com/services