Introduction - Purpose Of The Manual/Field Of Application; Presentation - Proper Use (Fig. 1); Norms And Certifications; Identification - Rating Plate Data (Fig. 2) - Arneg Lucerna 2 Manual Del Usario

Lucerna 2
English

1. Introduction - Purpose of the manual/Field of application

This instruction manual is for theLucerna 2line of refrigeration units.
The information that follows is intended to provide instructions regarding:
- Use of the unit - technical characteristics - installation and assembly - information for personnel
responsible for use - maintenance operations.
The manual should be considered part of the unit and should be kept for as long as the unit is in place.
The manufacturer considers itself released from any responsibility in the following cases:
- Improper use of the unit - improper installation, not performed according to the instructions provided -
electrical power defects - serious deficiencies in carrying out scheduled maintenance - non-
authorized modifications or interventions - use of non-original spare parts - partial or total disregard
for the instructions.
This manual must be available for the operators and personnel assigned to maintenance, so as to be
consultable at any time. In the case that it is transferred to a third-party, the manual should be provided
to all new users or owners, providing appropriate and prompt communication of such to the supplier.
In the case of damage or loss, please contact your supplier.
Note:Electronic devices can be hazardous to health. The norms and laws in effect must be res-
pected during installation and use.
All persons who use this unit must read this manual.

2. Presentation - Proper use (Fig. 1)

The Lucerna 2 refrigeration unit is a semi-vertical exposition unit with remote refrigeration, appro-
priate for the conservation and self-service sales of meat, cold meats, milk products, and fruits and
vegetables..

3. Norms and certifications

All the refrigeration unit models described in the usage manual for the Lucerna 2 series meet the
essential requirements for safety, health, and protection required by the following European directives
and laws:
- EC Directive 2006/42 on Machinery;
applied EN norms: EN ISO 14121:2007; EN ISO 12100-1:2005; EN ISO 12100-2:2003
- Directive on Electromagnetic Compatibility 2004/108/EC;
applied EN norms: EN 61000-3-2:2006; EN 61000-3-12:2005; EN 55014-1:2006;
EN 55014-2:1997;
- Directive on Low Voltage 2006/95/EC;
applied EN norms: EN 60335-1:2008; EN 60335-2-89 :2002/A2:2007
European Regulation EC-1935/2004 on materials destined for contact with food - norm applied: EN
1672-2
They are excluded from the field of application found in directive CEE 97/23 (PED) based on that cal-
led for in Article 3, paragraph 3 of said directive.
It is possible to request a copy of the product declaration of conformance by filling out the form
found at the website:
The performance of these refrigeration units was determined using tests conducted in conformance
with the UNI EN ISO 23953-2: 2006 norm under environmental conditions corresponding to climate
class 3 (25°C , 60% U.R.)
Environmental climate classes according to UNI EN ISO 23953 -2
Climate Classes Dry bulb temp.
1
2
3
4
5
6

4. Identification - Rating plate data (Fig. 2)

Inside the unit there is a rating plate with all of the data regarding characteristics:
16
http://
www.arneg.it/conformity
Relative Humidity
16°C 80%
22°C 65%
25°C 60%
30°C 55%
40°C 40%
27°C 70%
Dew point
12°C
15°C
17°C
20°C
24°C
21°C
05060090 00 12/02/2010