Lullaby Function; Out Of Range Alert; Menu Options; Menu Operation - General Explanation - Philips AVENT SCD525 Manual Del Usuario

EngliSh
12
2 To stop the paging alert tone, press the PAGE button again or press any button on the parent
unit.

lullaby function

Note: You can also operate the lullaby function in the menu of the parent unit (see chapter 'Menu
options', section 'Lullaby function').
1 Press the play/stop button E on the baby unit to play the currently selected
lullaby. (Fig. 27)
The lullaby starts to play and repeats continuously.
,
2 To select another lullaby when a lullaby is playing: (Fig. 28)
- Press the lullaby button K on the baby unit.
- Wait 2 seconds for the next lullaby to start.
- If you want another lullaby, press the lullaby button K on the baby unit again.
3 To stop the lullaby, press the play/stop button E on the baby unit again. (Fig. 27)

out of range alert

When the parent unit is out of range of the baby unit, the parent unit beeps from time to time and
the messages 'Searching' and 'Not linked' appear on the display. The LINK light on the parent unit
flashes red.
Note: The message 'Not Linked' also appears on the display of the parent unit when the baby unit is
switched off.

Menu options

All functions can be operated on the parent unit, but some functions can also be operated on the
baby unit.

Menu operation - general explanation

Note: Menu functions can only be operated when a connection has been established between the baby
unit and the parent unit.
1 Press the MENU button to open the menu (Fig. 29).
The first menu option appears on the display.
,
2 Use the – and + buttons to select the desired menu option (Fig. 30).
Note: The arrow indicates in which direction you can navigate.
3 Press the OK button to confirm (Fig. 31).
4 Use the + and - buttons to select the desired setting.
5 Press the OK button to confirm.
The new setting flashes once. The message 'saved' also flashes once and then disappears from
,
the display.
6 Press the MENU button again to exit the menu.

ECo mode

Note: You can only switch the ECO mode on and off in the menu of the parent unit.
You can use the ECO mode to reduce the energy consumption of the appliance. Monitoring your
baby from a small distance requires less transmission power and less electrical power
than monitoring your baby from a large distance. When you monitor your baby from a small
distance, you can activate the ECO mode. In the ECO mode, the appliance consumes