Enregistrement' ['Recording'] Tab - THOMSON 512323 Manual De Instrucciones

Plug and Play 16 channel colour
network Video recorder
• The Direct tab: allows you to adjust settings
(whether or not to display a custom name,
brightness, contrast, etc.) for each camera
separately.
• The Output tab: allows you to adjust the
resolution of the image transmitted to the TV or
monitor connected to your recorder.
• The Image Control tab: gives you access to the
advanced image controls for each camera. Here
you can rotate or flip a camera's feed, for example if
if was installed upside-down.
• The Hidden area tab: allows you to define a
hidden area for each camera, to cover up an
area that must not appear on the screen nor in
the video recordings.
d - CONFigurATiON

2.1.2 - 'ENrEgistrEmENt' ['rEcordiNg'] tab

Here you will find:
• The Recording tab, which allows you to activate
or deactivate video recording for each of the
cameras as well as pre-recording. For each
recording triggered by a movement, the pre-
recording feature shows the 5 seconds preceding
the motion that triggered the recording.
• The Programming tab: identical to the page with
the same name in the quick configuration assistant.
EN
11