Manual Camera Pairing - THOMSON 512323 Manual De Instrucciones

Plug and Play 16 channel colour
network Video recorder
5 Sender address. In out example using Gmail:
sender-address@gmail.com Click 'shift'
on the on-screen keyboard to make the '@'
character appear.
6 Minimum time between 2 consecutive alerts,
to be adjusted as required. Prevents you
from receiving repeated emails during short
periods of time.
7 The password used to log into the email
sender address. In our example using Gmail,
this is the password requested when logging
into the inbox on www.gmail.com
8 Email address that will receive the alerts
issued by your device. In our example
: addressee@gmail.com. Once the addresses
have been entered, a 'Test email' button
appears: if you like, click it to send a test
email.
9 By default, emails are sent 7 days a week, 24
hours a day. This button allows you to set the
times you authorise emails to be sent. Here
you can define the time periods when no
emails may be sent.
You can define the time slots independently
for motion detections (in green), activations of
wired inputs (in yellow), and the other events
(in red: loss of camera connection, covered
camera, etc.)
11 Click the 'Sauver' [Save] button after making
changes to save your settings
Important notes:
• In the 'Paramètre' [Parameters] menu / 'Entrée
filaire' [Wired input] / 'Mouvement' [Motion], don't
forget to tick the Email box so that your recorder
alerts you via email in the event motion is detected
(see previous paragraph).
• Some email providers ask you for
confirmation before authorising your device
to use their service (this is the case for
www.gmail.com in our example). Check the
sender address's inbox for more details.
d - CONFigurATiON

2.9 - MANUAL CAMERA PAIRING

The Thomson cameras designed for use with
your device are configured to be recognised
automatically. However, your digital video recorder
is also compatible with IP cameras and network
cameras that meet the ONVIF standard (example:
Thomson IP cameras, references 512390 to
512393), within the limits of the device's 8 channels.
To pair a camera manually, go to the 'Paramètre'
[Parameters] menu / 'Réseau' [Network] / 'Switch'.
Select 'Mode manuel' [Manual mode], then click on
'Sauver' [Save]:
Then go to the 'Paramètre' [Parameters] menu /
'Ecran' [Screen] / 'caméra IP' [IP camera]. Click on
the 'Ajout manuel' [Add manually] button:
1 2 3 4 5
11 12
6 7 8 9 10
13
17
EN