THOMSON Smart Bracket II Manual Del Usuario página 37

COLOUR VIDEO INTERCOM
The gate control does not
release the automated door.
The electric strike plate
does not open the door.
When speaking with a
visitor, the monitor sound
is low or distorted.
During a call, there is no
sound or the product
functions randomly
The cable section used is not
suitable.
The intercom panel and
the automated gate are not
connected correctly.
The cable section used is not
suitable.
The intercom panel and the
strike plate are not connected
correctly.
The style of electric strike plate
used is not suitable.
The intercom panel microphone
is obstructed.
The monitor(s) is/are not in
the correct "Master" or "Slave"
mode
Check the cable section with the
help of this operating manual.
Check the connections and input
used for the automated gate
with the help of the operating
manual for the automated gate.
Check the cable section with the
help of this operating manual.
Check the connections between
the intercom panel and the
electric strike plate.
Check that the strike plate
is compatible with the
specifications included in this
manual.
Check that the intercom panel
microphone is clean (dirtiness,
insects, etc.)
Check that the monitor
is correctly configured
by accessing the settings
management menu
www.mythomson.com
F - FAQ
EN EN
17