Getting Started; Resetting The Unit; Performing Initial Settings; Preparing The Card Remote - Sony XNV-L77BT Manual De Instrucciones

Getting Started

Resetting the unit

Before operating the unit for the first time, or
after replacing the car battery or changing the
connections, you must reset the unit.
Press the reset button (page 12) with a pointed
object, such as a ball-point pen.
Note
Pressing the reset button will erase the clock setting
and some stored contents.

Performing initial settings

After resetting, the display for the initial settings
appears.
Initial Setting
Subwoofer
Listening Position
Language
1
Touch "Subwoofer" to set the
subwoofer connection status.
Set to "ON" if a subwoofer is connected, or
"OFF" if not.
2
Touch "Listening Position" to set the
listening position.
Set to "Front L" if your listening position is
front left, or "Front R" if front right.
3
Touch "Language" to set the display
language.
Touch repeatedly until the desired language
(English/Spanish/Russian) appears.
4
Touch "OK."
The setting is complete.
This setting can then be further configured in the
setting menu.
• For details on setting the subwoofer connection
status, see page 58.
• For details on setting the listening position, see
"Optimizing sound for the listening position —
Intelligent Time Alignment" on page 51.
• For details on setting the display language, see
page 56.
OFF / ON
Front L / Front R
English
OK

Preparing the card remote

commander

Before using the card remote commander for the
first time, remove the insulation film.
17