Publicidad
Idiomas disponibles
Idiomas disponibles
• The appliance should only be used in domestic environment and for the
use that it has been designed for.
THESE INSTRUCTIONS MUST BE FOLLOWED.
AUTOMATIC TEMPERATURE REGULATOR
THE RIGHT TEMPERATURE WILL BE KEPT AT THE SET TEMPERATURE
OPERATION INSTRUCTIONS
RIGHT CONSTRUCTION: BEFORE USING CLEAN THE HEAT PLATE
AND COVER COMPLETELY
1) PUT THE TEMPERATURE SCALE TO "OFF" POSITION AND PUT
THE AUTOMATIC TEMPERATURE REGULATOR IN THE INLET.
2) PUT THE PLUG INTO AN EARTHED 230V SOCKET
3) THE TEMPERATURE SCALE CAN BE SET IN ACCORDANCE
WITH THE FOOD; THE CONTROL LAMP IS ON TO SHOW THE PAN
IS HEATING.
COOKING
1) AFTER THE PAN HAS BEEN TURNED ON, WAIT 5-10 MINUTES,:
AS SOON AS THE CONTROLLAMP WILL LIGHT, YOU CAN START
COOKING.
2) IF THE FOOD IS COMPLETELY DONE, THE TEMPERATURE CAN
BE KEPT BY PUTTING THE TEMPERATURE SCALE TO 'WARMKEEP'.
• If the lamp goes off, this is not an error, the automatic temperature
regulator is in function.
• If there is some noise, this is not an error: the noise comes from the
heater and the heat plate
• Do not put your hand under the reflector; do not put any inflammable
material on the pizza pan.
- 7 -
Publicidad
