Sinbo SP 5204 Manual Del Usuario página 9

3. After use
1) After use put the temperature scale to OFF
2) Pull the plug out of the socket, and then take out the automatic temperature
regulator from the heat plate
Caution: Because the temperature leader of the temperature regulator is
very hot after using the heat plate, let the heat plate cool down before
pulling it out.
3) After cooling down, clean the temperature regulator with a dry and soft
cloth.
Caution measures to be taken by operating the heat plate
The surface of the heat plate is non-stick, so take care as following:
• Do not use sharp objects made of metal.
• Do not use a sharp knife to cut the food on the surface.
• Do not put the automatic temperature regulator on the heat plate.
• It is not permitted to touch the heat plate.
• Do not use cleaner, nylon brush or metal brush, the surface of the heat
plate would be damaged.
• The plate must be cleaned after using with a wet cloth. Food rests or fat
on the surface will lead to fire
SAFETY MEASURES AND PROPOSALS
In order to avoid shock, fire or functions errors, the following caution
measures must be followed.
• The power input must be 230V;
• The cable is not permitted to be curved and must be undamaged.
- 8 -