Reese Explore J-RAC Guía De Instrucciones página 3

INSTALLATION INSTRUCTIONS
3. Remove clamp bracket (F) from bottom of J-Rac (A). FIG. 3.
4. Set J-Rac (A) on top of your
front crossbar with TALL SIDE
INWARD and hold in place.
FIG. 4.
5. Hold clamp bracket (F) against bottom of your crossbar. Feed
carriage bolts (H) down through holes of clamp bracket. FIG. 5.
6. Screw clamp knobs (G) back onto carriage bolts (H) until snug.
Do not tighten at this time. FIG. 6.
3
4
5
6
PAGE 3 1394900_Rev A • Questions? (800) 234-6992 • ReeseBrands.com
A
F
A
F
H
H
G