Proper Use - Reese Explore J-RAC Guía De Instrucciones

PROPER USE

LOADING WATERCRAFT
1. Place your watercraft into J-Rac.
2. Working with one J-Rac at a time, maneuver cambuckle strap (C) so
both ends hang over top of your watercraft. FIG. 13.
3. Pull downward on both ends to ensure strap loop is positioned at the
highest point on the J-Rac. FIG. 14.
4. Run open end of cambuckle strap (C) through J-Rac (A), around your
cross bar, and back up through the J-Rac. FIG. 15.
5. Move the buckle cover (B) so you can feed the open end of the strap
through the cambuckle.
6. Hold cambuckle side of the strap while pulling downward on loose end
to secure. FIG. 16.
7. Repeat steps 2-6 on second J-Rac.
8. Double check to ensure both cambuckle straps (C) are tight, then slide
buckle cover (B) over cambuckles to protect your watercraft. FIG. 17.
13
C
15
C
A
17
PAGE 6 1394900_Rev A • Questions? (800) 234-6992 • ReeseBrands.com
14
C
16
B
B
C