Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
This guide contains abbreviated "Quick Reference" procedures for the
Scan Tool. Please visit matco.carscan.com to download a copy of the
Retrieve Codes
Connect the Scan Tool to the vehicle's test connector.
Turn the ignition key "On." DO NOT start the engine.
The tool will automatically link to the vehicle's computer.
View Results
The Scan Tool retrieves stored codes, Freeze Frame
data and System Status.
Codes, I/M Monitor Status and Freeze Frame data are
displayed on the Scan Tool's display screen. System
Status is indicated by LED indicators.
If a recommended solution for the "priority" DTC is
available, the FixAssist® screen for the DTC displays. The
screen shows recommended inspection and repair actions
to correct the malfunction that caused the DTC to be set.
If more than one DTC was retrieved, press and release
the DTC/FF button, as necessary. Freeze Frame Data (if
available) will be displayed after the Priority Code by
pressing the DTC/FF button.
In the case of long code definitions, or when viewing
Freeze Frame Data, use the UP
buttons, as necessary, to view the additional information.
To view OEM Enhanced DTCs (if available), press the
SYSTEM
The OEM Enhanced mode provides the ability to retrieve
OEM enhanced DTCs, Anti-Lock Brake System (ABS)
DTCs and Supplemental Restraint System (SRS) DTCs
from
most
Honda/Acura and Toyota/Lexus vehicles.
The System Menu lets you initiate an All Module Scan that performs a self-test of
all vehicle controllers and reports stored faults for each controller. The Module
Selection option lets you choose a specific module to test.
View Live Data
Place the Scan Tool in "Code Retrieval" mode. Start the
engine.
Press and release the LD button to place the Scan Tool in
"Live Data" mode. Real-time Live Data (PID) information
supported by the vehicle under test displays.
complete Owner's Manual.
button; the System Menu displays.
Chrysler/Jeep,
and DOWN
Ford/Mazda,
GM/Isuzu,
1
Publicidad
Tabla de contenido
