Perform Additional Tests; Perform System And Actuator Tests; View Vehicle Information; Access Reference Information - Matco Tools FixAdvisor Pro MD 100 Guía De Referencia Rápida

Perform Additional Tests

While linked to a vehicle, press the M button. The Main
Menu displays. Use the UP
necessary, to highlight Mode Tests, then press the
ENTER
Use the UP
highlight the desired option, then press the ENTER
button.
You can use the Scan Tool to perform additional diagnostic tests (O2 Sensor Test,
OBD Monitor Test, EVAP Leak Test).
From the Main Menu you can also perform battery/alternator monitor tests, access oil
reset and battery reset procedures, and view drive cycle procedures for Monitors
supported by the vehicle.

Perform System and Actuator Tests

While linked to a vehicle, press the M button. The Main
Menu displays. Use the UP
necessary, to highlight System/Actuator Tests, then
press the ENTER
Test Menu displays. Use the UP
buttons, as necessary, to highlight the desired option, then
press the ENTER
You can use the Scan Tool to perform bi-directional tests of vehicle systems for
most late model Chrysler/Jeep, Ford/Mazda, GM/Isuzu, Honda/Acura and
Toyota/Lexus vehicles. Available options vary depending on the vehicle under test.

View Vehicle Information

While linked to a vehicle, press the M button. The Main
Menu displays. Use the UP
as necessary, to highlight Vehicle Information, then
press the ENTER
You can use the Scan Tool to view vehicle information
stored in your vehicle's on-board computer.

Access Reference Information

From the Main Menu, highlight DLC Locator, then press
the ENTER
DLC Locator lets you find the location of the Data Link
Connector (DLC) for a specified vehicle.
From the Main Menu, highlight Tool Library, then press
the ENTER
Menu. From the Tool Library Menu you can access
libraries of OBD1 and OBD2 DTC definitions, or view
definitions and descriptions of the I/M MONITOR
STATUS icons and SYSTEM STATUS LEDs.
button. The System Tests menu displays.
and DOWN
button. The System & Actuator
button.
button.
button to access the DLC Locator. The
button to display the Tool Library
and DOWN
buttons, as necessary, to
and DOWN
and DOWN
and DOWN buttons,
2
as
as